|
Before fitting a bearing
to a shaft, confirm the shaft size is correct
h7. i.e. shaft = zero and minus.
Lightly oil the shaft prior
to fitting the inner race
When fitting the inner race,
there will always be a gap between inner race
halves
Place clamping ring joints
at 90º to inner race joints
Cage
clip open
Note that the cage halves are
also numbered. Cage clip closed. Note when the
cage is joined the pins are in the holes provided.
Note the pins are correctly
positioned in the clips
|
Inner race halves are matched
numbered. Ensure the matching numbers are fitted
together
Ensuring inner race gaps
are approximately equal. The butt faces of the
inner race halves should never be in contact with
each other.
Tighten torque of inner race
cap head screws is as per fitting instruction
included with every bearing
Note to split cage, insert
flat screwdriver between clip end and roller and
lift metal flap
Prior to fitting the cage,
the inner race should be greased to the height
of the clamping rings.
|
